Posts

Showing posts from 2012

AMIE SUMMER EXAM 2013 DETAILS

Exam Form submittal date:

Candidates not appeared in Winter 2012 Examinations : February 20, 2013to March 21, 2013.

 Candidates appeared in Winter 2012 Examinations : March 21, 2013to April 19, 2013.

Time table.pdf 



Examination Application Form 



AMIE WINTER 2012 MATERIAL SCIENCE AND ENGINEERING QUESTION PAPER

AMIE WINTER 2012 MATERIAL SCIENCE AND ENGINEERING QUESTION PAPER

AMIE WINTER 2012 FUNDAMENTALS OF DESIGN AND MANUFACTURING QUESTION PAPER

AMIE WINTER 2012 FUNDAMENTALS OF DESIGN AND MANUFACTURING QUESTION PAPER


AMIE WINTER 2012 COMPUTING AND INFORMATICS QUESTION PAPER

AMIE WINTER 2012 COMPUTING AND INFORMATICS QUESTION PAPER


AMIE WINTER 2012 SOCIETY AND ENVIRONMENT QUESTION PAPER

AMIE WINTER 2012 SOCIETY AND ENVIRONMENT QUESTION PAPER

AMIE ELECTRICAL MACHINE DESIGN STUDY BOOK DOWNLOAD EL 407

ELECTRICAL MACHINE DESIGN STUDY BOOK DOWNLOAD EL 407

CONTENTS

Principal Laws and Methods in Electrical Machine Design

Electromagnetic Principles
Numerical Solution
The Most Common Principles Applied to Analytic Calculation
1.3.1 Flux Line Diagrams
1.3.2 Flux Diagrams for Current-Carrying Areas
Application of the Principle of Virtual Work in the Determination
of Force and Torque
Maxwell’s Stress Tensor; Radial and Tangential Stress
Self-Inductance and Mutual Inductance
Per Unit Values
Phasor Diagrams

Windings of Electrical Machines
2.1 Basic Principles
2.1.1 Salient-Pole Windings
2.1.2 Slot Windings
2.1.3 End Windings
2.2 Phase Windings
2.3 Three-Phase Integral Slot Stator Winding
2.4 Voltage Phasor Diagram and Winding Factor
2.5 Winding Analysis
2.6 Short Pitching
2.7 Current Linkage of a Slot Winding
2.8 Poly-Phase Fractional Slot Windings
2.9 Phase Systems and Zones of Windings
2.9.1 Phase Systems
2.9.2 Zones of Windings


CLICK HERE TO DOWNLOAD

AMIE PART B ELECTRICAL MACHINE DESIGN EL 407 STUDY MATERIALS AND SOLVED PROBLEMS

AMIE PART B ENGINEERING MANAGEMENT WINTER 2005 TO WINTER 2007 QUESTION PAPER

AMIE WINTER 2012 EXAM REGISTRATION DETAILS

Image
AMIE WINTER 2012 EXAM REGISTRATION DETAILS

Registration for WINTER2012 has been announced.

To view your registration details including roll number, please submit your membership number.


GO TO LINK






AMIE ELECTRICAL , MECHANICAL AND ELECTRONICS AND COMMUNICATIONS ENGINEERING QUESTION PAPERS SUMMER -2012

KIND ATTENTION CIVIL , ELECTRICAL , MECHANICAL AND ELECTRONICS AND COMMUNICATION ENGINEERING MEMBERS.

DOWNLOAD QUESTION PAPERS SUMMER -2012
******************************
**************
***********************************************
CIVIL ENGG MEMBERS
***********************************************

CIVIL ENGG DOWNLOAD QUESTION PAPER (SUMMER 2012)
***********************************************

IC 402 : Engineering Management @ https://www.facebook.com/groups/er.rajivamiehelpline/474907039199208/

CV 403 :Civil Engineering Materials and Construction Practices @ https://www.box.com/s/sw3cp96i4o781k4man5i

CV 405 :Water Resources Systems @ https://www.box.com/s/xf3r61dxj0sqb6fkx10l

CV 406 : Principles of Geo-informatics @ : https://www.box.com/s/o1pyc4gd7pbmof8gxdjo

CV 407 : Analysis and Design of Structures @ https://www.box.com/s/rtl3z1so0pg58p0k9rlu

************************************************
MECH MEMBERS
*********************************************…

AMIE ENGINEERING MANAGEMENT STUDY NOTES STAFFING

Image
AMIE ENGINEERING MANAGEMENT STUDY NOTES STAFFING




Manpower requirements- The very first step in staffing is to plan the manpower inventory required by a concern in order to match them with the job requirements and demands. Therefore, it involves forecasting and determining the future manpower needs of the concern. Recruitment- Once the requirements are notified, the concern invites and solicits applications according to the invitations made to the desirable candidates. Selection- This is the screening step of staffing in which the solicited applications are screened out and suitable candidates are appointed as per the requirements. Orientation and Placement- Once screening takes place, the appointed candidates are made familiar to the work units and work environment through the orientation programmes. placement takes place by putting right man on the right job. Training and Development- Training is a part of incentives given to the workers in order to develop and grow them w…

AMIE PART B ENGINEERING MANAGEMENT STUDY MATERIAL Project Management

Project Management for Business and Engineering: Principles and PracticeProject Management for Business and Engineering is a direct response to the ever-increasing need for better project management. This book encompasses the full range of project management - everything from origins, philosophy, and methodology to actual applications. Nicholas describes concepts and techniques such as project initiation and proposals, scope and task definition, scheduling, budgeting, risk analysis, control, project organization, and the often overlooked "people" side - project leadership, team building, conflict, and stress management.

AMIE PART B ENGINEERING MANAGEMENT STUDY VIDEOS

Image
AMIE PART B ENGINEERING MANAGEMENT STUDY VIDEOSLecture - 1 Project and Production Management - An Overview PROJECTMANAGEMENT CPM and PERT What is ISO 9001? Free ISO 9001 Overview training video Project Planning with Sticky Notes

AMIE PART B ELECTRICAL MEASUREMENTS AND CONTROL E BOOK DOWNLOAD

AMIE PART B ELECTRICAL MEASUREMENTS AND CONTROL

A VERY USEFUL E BOOK  MODERN CONTROL ENGINEERING BY OGATA

CLICK HERE TO DOWNLOAD

AMIE PART B ELECTRICAL ENGINEERING VIDEOS ON ELECTRICAL MOTORS

Image
AMIE PART B ELECTRICAL ENGINEERING VIDEOS ON ELECTRICAL MOTORSHow electric motors work  Induction Motor How it works single phase induction motor animation

AMIE PART B ELECTRICAL ENGINEERING INTERATIVE WAY TO LEARN ELECTRIC MOTOR AND GENERATORS

AMIE PART B ELECTRICAL ENGINEERING INTERACTIVE WAY TO LEARN ELECTRIC MOTOR AND GENERATORS

CLICK HERE

AMIE PART B ELECTRICAL MACHINES STUDY MATERIAL PARALLEL OPERATION OF SYNCHRONOUS GENERATOR

AMIE PART B ELECTRICAL MACHINES STUDY MATERIAL PARALLEL OPERATION OF SYNCHRONOUS GENERATOR




The parallel connections of alternator are used to increase the total efficiency of power system and reliability or continuity of supply & maintains & repair &physical size of alternators.
EFFICIENCY: - The load on the electric power system fluctuations since the generator operated on full load then as the load increases another unit is connected to parallel with the already running alternator. This increases the overall efficiency of the operations.
TO DOWNLOAD FULL DOCUMENT CLICK HERE

AMIE PART B ENGINEERING MANAGEMENT STUDY NOTES

Scientific management
Scientific management, also called Taylorism, was a theory of management that analyzed and synthesized workflows.

These include analysis; synthesis; logic; rationality; empiricism; work ethic; efficiency and elimination of waste; standardization of best practices; disdain for tradition preserved merely for its own sake or merely to protect the social status of particular workers with particular skill sets; the transformation of craft production into mass production; and knowledge transfer between workers and from workers into tools, processes, and documentation.

The core ideas of scientific management were developed by Taylor in the 1880s and 1890s and were first published in his monographs A Piece Rate System (1895), Shop Management (1903) and The Principles of Scientific Management (1911).

While the terms "scientific management" and "Taylorism" are often treated as synonymous, an alternative view considers Taylorism as the first form of scie…

AMIE SUMMER 2012Grade card annouced

Grade card annouced for summer 2012


 check here

To see marks in subjects click on this click when the grade card comes 
https:// online.ieindia.info/marksheet.aspx

AMIE PART B ELECTRICAL MECHINES STUDY NOTES WARD LEONARD SYSEM

Ward Leonard Control, also known as the Ward Leonard Drive System, was a widely used DC motor speed control system introduced by Harry Ward Leonard in 1891.

In early 1900s, the control system of Ward Leonard was adopted by the U.S. Navy and also used in passenger lift of large mines.

An outstanding contribution to the war effort was the use of Ward-Leonard Control systems in antiaircraft radars.

The Ward Leonard control system was widely used for elevators until thyristor drives became available in the 1980s, because it offered smooth speed control and consistent torque.

A Ward Leonard drive unit consists of a motor and generator with shafts coupled together.

The generator is a DC generator, with field windings and armature windings.

The amplifier output is usually connected to a second motor, which moves the load, such as an elevator.

With this arrangement, small changes in current applied to the input, and thus the generator field, result in large changes in the output, all…

AMIE SUMMER 2012 SEC A DIPLOMA AND NON DIPLOMA QUESTION PAPERS FULL

AMIE SUMMER 2012 SEC A DIPLOMA AND NON DIPLOMA QUESTION PAPERS FULL





CLICK ON BOTTOM LINK



QUESTION PAPERS


 source and thanks to ER RAJIV

AMIE SUMMER 2012 RESULT

Image
finally summer 2012 results out check it here @

http://www.ieindia.info/memex.asp

enter your membership no



AMIE PART A FULL SUBJECT STUDY MATERIAL

Amie part A full subjects study materials

This links cover all part of the section A Sylabus.



MATERIAL SCIENCE


DESIGN AND MANUFACTURING



COMPUTER AND INFORMATICSLINK BROKEN




SOCIETY AND ENVIRONMENT


Home

amieexamhelp Part A  full study material



AMIE PART A MATERIAL SCIENCE AND ENGINEERING STUDY N0TE LINK

AMIE PART A MATERIAL SCIENCE AND ENGINEERING STUDY N0TE LINK

click here

AMIE SUMMER 2012 QUESTION PAPER FOR PART A FUNDAMENTALS OF DESIGN AND MANUFACTURING

AMIE SUMMER 2012 QUESTION PAPER FOR PART A FUNDAMENTALS OF DESIGN AND MANUFACTURING Amie Summer 2012 Fundamentals of Design and Manufacturing Question Paper Amieexamhelp.blogspot.com

AMIE PART A SUMMER 2012 QUESTION PAPER SOCIETY AND ENVIRONMEN

AMIE PART A SOCIETY AND ENVIRONMENT SUMMER 2012 QUESTION PAPER

AMIE SUMMER 2012 QUESTION PAPER FOR COMPUTING AND INFORMATICS

AMIE SUMMER 2012 COMPUTING AND INFORMATICS QUESTION PAPER AMIE Summer 2012 Computer & Informatic Questionpaper amieexamhelp.blogspot.com

AMIE PART A SOCIETY AND ENVIRONMENT STUDY BOOK

AMIE PART A SOCIETY AND ENVIRONMENT STUDY BOOK
found this book for society and Environment by Naik.
This is quite a good book. It is available in the google books online.
Some pages are not for preview, however there are some
topics which you would find useful.



Book only for preview.
No pdf available.
If you need to save take screen shots.

AMIE WINTER 2012 Exam Dates, time table,exam centres and fees structure

Image
Exam Form submittal date:

Candidates not appeared in Summer 2012 Examinations : August 21, 2012 to September 21, 2012.

Candidates appeared in Summer 2012 Examinations : September 21, 2012 to October 19, 2012.

Time table.pdf

 Time Table






































fees structure



































Exam Centre


AMIE PART B ELECTRICAL ENGINEERING BASICS ELECTRIC MOTOR

ELECTRIC MOTOR

An electric motor is an electromechanical device that converts electrical energy into mechanical energy.

Most electric motors operate through the interaction of magnetic fields and current-carrying conductors to generate force.

The reverse process, producing electrical energy from mechanical energy, is done by generators such as an alternator or a dynamo; some electric motors can also be used as generators, for example, a traction motor on a vehicle may perform both tasks.

Electric motors of increasing efficiency were constructed from 1821 through the end of the 19th century, but commercial exploitation of electric motors on a large scale required efficient electrical generators and electrical distribution networks.

Some devices convert electricity into motion but do not generate usable mechanical power as a primary objective, and so are not generally referred to as electric motors.

Some electric motors are used to produce torque or force.

Other Sprague elect…

AMIE SUMMER 2012 QUESTION PAPER MATERIAL SCIENCE AND ENGINEERING

First and exclusive


AMIE SUMMER 2012 QUESTION PAPER MATERIAL SCIENCE AND ENGINEERING


only on www.amieexamhelp.blogspot.com

AMIE Material Science and Engineering Summer 2012 Question Paper amieexamhelp.blogspot.com

Exam timing and time table for AMIE summer 2011

Image
Exam timing and time table for AMIE summer 2011

Note FN timing 10 AM to 1 PM
          AN timing 2.30 PM to 5.30 PM




AMIE old question papers section A 2004-2008

AMIE old question papers section A 2004-2008 in .zip format

Amie summer 2011 part A question paper.

Amie old question paper materials, computing, manufacturing and society.

Amie old question paper.




click here

MATERIAL SCIENCE AND ENGINEERING STUDY PRESENTATION ON PHASE DIAGRAM

MATERIAL SCIENCE AND ENGINEERING STUDY PRESENTATION ON PHASE DIAGRAM

Alloys steel

AMIE part A material science and engineering presentation on crystal diffect

AMIE part A material science and engineering

Full amie exam help material science notes

Click here

AMIE SUMMER 2012 Registration details

To view your registration details

including roll number

submit your membership number.

CLICK HERE

AMIE Exam Papers How to Present motivational power point presentation

Interactive way to study Material science AMIE part A 'Material property'

Interactive way to study Material science AMIE part A

'Material property'


GO

Interactive way to study Material science AMIE part A 'Tensile Testing Simulation'

Interactive way to study Material science AMIE part A
'Tensile Testing Simulation'


CLICK HERE

AMIE part A material science and engineering study note for summer 2012 'Tempering'

Tempering is a process of heat treating, which is used to increase the toughness of iron-based alloys.

For metals, tempering is usually performed after hardening, to reduce some of the excess hardness, and is done by heating the metal to a much lower temperature than was used for hardening.

The exact temperature determines the amount of hardness removed, and depends on both the specific composition of the alloy and on the desired properties in the finished product.

For instance, very hard tools are often tempered at low temperatures, while springs are tempered to much higher temperatures.

In glass, tempering is performed by heating the glass and then quickly cooling the surface, increasing the toughness.

Tempering is a heat treatment technique applied to ferrous alloys, such as steel or cast iron, to achieve greater toughness by decreasing the hardness of the alloy.

Tempering is usually performed after quenching, which is rapid cooling of the metal to put it in its hardest s…

Design & Manufacturing AMIE part A full question paper

Design & Manufacturing

AMIE

part A


full question paper

2005-10


download

AMIE part A computer and informatics full question paper 2005 to 2010 winter and summer

AMIE part A

computer and Informatics

full question paper

2005 to 2010 winter and summer



download

AMIE EXAM 2011 Computing & Informatics QUESTION PAPER

summer 2011

Computing & Informatics

question paper


download

AMIE winter 2011 question paper for part A FUNDAMENTALS OF DESIGN AND MANUFACTURING

First time on Internet AMIE winter 2011 question paper for part A FUNDAMENTALS OF DESIGN AND MANUFACTURING DOWNLOAD

Amie study material for part A Material Science and Engineering

All material science study materials
Click here

Amie study material for Part A Material Science and engineering


GRADE AND MARK IN AMIE

GRADING SYSTEM - AMIE
Range of Marks Grade Grade Point
>75 H 10
66-74 A 9
60-65 B 8
50-59 C 6
35-49 D 5
20-34 E
0-19 F
1.Only grade will be provided in individual subjects.

2.In the pass mark sheet of Section A/Section B Examination, apart from grade
in individual subjects, GPA (Grade Point Average ) will also be provided.
3. For a complete pass in Section A or in Section B, minimum GPA shall be 6.
4. Full marks in each subject including project work and laboratory experiments : 100
5. Minimum grade for exemption in each subject : Grade C

6. Minimum grade for passing project work : Grade B
7. Minimum grade for passing laboratory experiments : Grade B
8. Reappearance is not permissible in the subject(s) in which grade C and above is obtained in an examination.

9. Score of grade 'D' in one subject of Section A (Diploma) or two subjects of
Section A (Non-diploma)/Section B is only considered in the last attempt provided
all the subjects in the scheme are co…

Winter 2011 exam result published

Winter 2011 exam result published
To view the Result, Please Submit your Membership No

link